1000W Low Frequency Dimmable CMH HPS MH Ballast
Introduction:
SunPlix 1000W low frequency, square wave knob dimming digital ballast, is built in Fuzzy Logic technology, can keep lumen maintenance rate higher than 95% at 30,000 hours and maintain the initial spectrum.
It can ignite bulbs more than 100 feet away.
With LamPal® technology, this ballast can work with 1000W HPS/MH/CMH DE, 630W CMH DE, 600W HPS/MH DE and 315W CMH SE bulbs.
| Name | Description |
|---|---|
| Output power (Max) | 1150W |
| Operating voltage | 120V/240V |
| compatible bulbs | 1000W/630W CMH DE, 1000W 600W HPS/MH DE, 315W CMH SE |
| Safe voltage | 94V~276V |
| Input frequency | 50/60Hz |
| Power factor | >0.97 |
| THD | <10% |
| Protection functions | Protection of short-circuit, open-circuit, over-voltage, under-voltage, over-current, hot lamp startup, lightning, over heat, and lamp failure with lamp life warning. |
| Size | L: 12.2”, W: 9”, H: 4.25” |
| Net weight | 9.9 lbs |
| Warranty | 3 years |
Cautions:
- The digital ballast should work on operating voltage with corresponding bulbs. High power bulb can be used to dim to low power output. If you need to increase the power of low power bulb, you should install the lamp in a closed hood.
- The work environment temperature for the ballast ranges from -40 F°/-40 C° to +122 F°/+50 C°, the maximum work temperature of its shell can be +158 F°/+70 C°.
- The ballast should avoid working under high temperature environment which will affect its service life.
- If the ballast is damaged, it cannot be opened. Users should exchange it with suppliers or send it to the factory for maintenance.
SunPlix CMH ballast is the real low frequency, square wave CMH ballast!
Other brand CMH ballast is NOT the real low frequency, square wave CMH ballast
Reviews
There are no reviews yet.