700W (Dual 350) IR remote Dimming Ballast 
Introduction:
700W CMH (dual 350) low frequency square wave dimming ballast utilizes Fuzzy Logic technology. The patent technology can keep lumen maintenance rate higher than 95% at 30,000 hours and maintain the initial spectrum. It can ignite bulbs more than 100 feet away. With LamPal® technology, this ballast can work with 150W, 210W, 315W and 350W CMH/HPS/MH lamps. The remote control (sold separately) allows you to turn on/off the light and select any of the power outputs: 300W, 420W, 630W and 700W. You can use the 0-10V module (optional) to adjust power output from 300W to 700W continuously.
When lamp power is decreased, it saves energy and shifts light spectrum to more blue light for veggies; when lamp power is increased, it outputs more strong light and shifts light spectrum to more red light to grow more and bigger flowers and shorten the growing circle.
| Name | Description |
|---|---|
| Input power | 760W |
| Output power (Max) | 700W |
| Operating voltage | 120V/208V/240V/277V |
| Amperage drawn | 6.34A/120V, 3.65A/208V, 3.17A/240V, 2.74A/277V |
| Safe voltage | 94V~300V |
| Input frequency | 50/60Hz |
| Power factor | >0.99 |
| THD | <6% |
| Efficiency | >93% |
| Communication interface | IR (0~10V optional) |
| Lamp wire length (Max) | >100 feet (16 gauge lamp wire) |
| Power/light output | 0W (On/Off), 300W, 420W, 630W, 700W or 300W~700W |
| Protection functions | Protection of short-circuit, open-circuit, over-voltage, under-voltage, over-current, hot lamp startup, lightning, over heat, and lamp failure with lamp life warning. |
| Size | L: 12”, W: 9.5”, H: 4.5” |
| Net weight | 12 lbs |
| Warranty | 3 years |
Input:
Black wire: AC power Line wire
White wire: AC power Neutral wire
Green wire: Ground wire
Output:
Black wire: AC power Line wire
White wire: AC power Neutral wire
Green wire: Ground wire
Compatible Lamps:
Cautions:
- The ballast should work on operating voltage with corresponding bulbs. High power bulb can be used to dim to low power output, but not the reverse.
- The work environment temperature for the ballast ranges from -40 F°/-40 C° to +122 F°/+50 C°, the maximum work temperature of its shell can be +158 F°/+70 C°.
- The ballast should avoid working under high temperature environment which will affect its service life.
- Combustible substances and corrosive gas should not be placed in the work environment of the ballast.
- If a ballast is damaged, do not try to fix it. Users should exchange it with suppliers or send it to the factory for maintenance.
SunPlix CMH ballast is the real low frequency, square wave CMH ballast!
Other brand CMH ballast is NOT the real low frequency, square wave CMH ballast
Reviews
There are no reviews yet.